Factory wholesale Smf Duplex Middle Pressure Line Filter Series - Dfb Pressure Filter For Plated Connection Series – Xinyuan

The high-pressure plate filter can be directly installed on the valve block of the system for further removal or blocking, blocking foreign matter produced due to outside intrusion or component wear while working. Especially suitable for automatic control, system and SERVO system. The utility model can prevent the high-precision control element and the executive element from being worn or stuck early because of the pollution, thereby reducing the failure and prolonging the service life of the element. The dropper is equipped with a differential pressure transmitter, when the leakage core is plugged into the oil inlet and outlet differential pressure is 0. 5 MPA, the switch signal will be sent out, and the filter element should be cleaned or replaced to ensure the system and installation. The utility model has the advantages of compact installation structure and small volume, and the leakage core is made of imported glass fiber moisten material, which has the advantages of high overtemperature precision, strong oil-passing ability, small original pressure, large pollution-receiving capacity, etc. . The over-leakage accuracy was calibrated with absolute over-temperature accuracy. The over-temperature ratio of 83,5,10,20N200 was NN99.5% . Comply with ISO standard.

DFB series filter is of high pressure type, and used in the pressure line of hydraulic system. It can remove all the contaminants from the hydraulic system. The element of this series is made of glass fibre, it has high efficiency and filtration, large dirt capacity and low initial pressure drop. Beta ratio is over 200.
It has two protection equipment which are by-pass valve and contamination indicator.The indicator will act when the pressure drop across element attains adjustable pressure. The element should be cleaned or changed in time.

Pressu re filter for sandwich stacking
BH:Water-glycel
Omit if use hydraulic oil
Pressure class H: 32MPa

c：With CS-IIIC indicator
Omit if without indicator
Fiteration accuracy (p m)
Flow rate (Mmin)

Note: * is filtration accuracy. If the filter flu id is water-glycol, usage pressure 32MPa,flower rate 60L/min,filtration accuracy 10 p m and with CS-III indicator. The model of the filter isDFB • BH-H60 x 10C, the model of element is XY0060D010BN3HC.BH