Filter
-
Gu-h With Check Valve Pressure Line Filter Series
It is mounted on the pressure line of the hydraulic system and is used to remove or stop the mechanical impurities mixed into the hydraulic oil and the Gum, pitch, carbon residue, etc. produced by the hydraulic chemical reaction itself, prevent the valve core jam, throttle hole, gap and damping hole plug and hydraulic components too fast wear, and other failures. The dropper is equipped with a pressure difference transmitter. When the temperature core is blocked by pollution to the pressure difference of the oil inlet and outlet is 0.35 MPA, the switch signal is sent out. The leakage core should be cleaned or replaced to ensure the safety of the system.
-
Zu-a Qu-a Wu-a Xu-a Return Line Filter Series
The superheater is installed at the return oil pipeline of the hydraulic system. It is used to drop off the worn components in the oil, the worn metal powder and the worn rubber impurities in the seal, so as to keep the oil in the return oil slightly clean, it is beneficial to the circulation of oil in the system. The utility model can be divided into four types of fiber type, paper type, net type and line gap type. Chemical Fiber type than paper type, over-temperature effect is good, high precision, chemical fiber type and paper type core leakage plug after cleaning more difficult, therefore, must replace the temperature core. The dropper is equipped with a pressure difference transmitting device.
-
Zu—h Qu-h High Pressure Line Filter Series
The superheater is installed on the pressure line of the hydraulic system to drop off the resin, pitch, carbon residue, etc. from the mechanical impurities and the chemical reaction of the hydraulic oil itself, thus prevent it spool stuck, throttle small hole gap and damping hole plug and hydraulic components too fast wear, and other failures. The filter has good filtering effect and high precision, but it is difficult to clean after being blocked, and the temperature core must be replaced. The leakage device is equipped with a pressure difference sending device.
-
Xnl Tank Mounted Return Line Filter Series
The XNL series return line filter is a new type filter. It is used in the return line of hydraulic system to remove all the contaminants and keep the oil cleaning when the oil returns to the tank. This series filter has some features as follow: a） it can be installed on the top of tank; b） The check valve will not let the oil flow out of the tank during maintenance the contaminants inside the element can be taken out when changing the element; c） there is a by-pass valve on the top of element, when the pressure drop across the filter element attains 0.4MPa, the valve will open to protect the hydraulic system safety;（I） the permanent magnets inside the filter can filter the m agnetic particles above 1pm dia. from the oil.
-
Rf Tank Mounted Return Filter Series
This kind of filter is used in the hydraulic system for fine filtration. The filter can filter metal impurity, rubber impurity or other contamination, and keep the tank clean. This filter can be installed on the top of the cover directly or installed with pipe. It has indicator and by-pass valve. When the dirt accumulate in the filter element or the temperature of the system is too low, and the oil inlet pressure reaches 0.35Mpa, the indicator will give signals showing that the filter element should be cleaned, changed or rise the temperature. If no service is done and as the pressure reaches to 0.4mpa,the by-pass valve will open. The filter element is made of glass fiber;so it has high filtration accuracy, low initial pressure loss, high dirt-holding capacity and so on. Filter radio 0 3, 5, 10, 20>200, filterefficiency n>99.5%, and fit the ISO standard.
-
Rfa Tank Mounted Mini-Type Return Filter Series
The filter is installed on the top of the oil tank to keep the oil flowing back to the oil tank clean. The filter is used to remove the contaminants such as metal particles and rubber impurities of the sealing parts in the hydraulic system, the tube body part is immersed into the oil tank and is provided with devices such as by-pass Valve, diffuser, temperature core pollution clogging transmitter, etc. . The utility model has the advantages of compact structure, convenient installation, large oil-passing capacity, small pressure loss, easy core replacement, etc. .
-
Xnj Tank Mounted Suction Filter Series
The XNJ series filters can be installed on the top of the tank and the element is immersed in the oil, so it is easy for installation. During maintenance, you only need to turn off the screws of the connecting flange, and pull-out the connecting flange, the element can be changed or cleaned. A vacuum indicator in the filter gives signals when the pressure drop across the element reaches -0.018 MPa showing that the filter element should be cleaned or changed. If no maintenance is done, as the pressure drop rises to 0.02MPa, the by -pass valve in this filterwill open allowing oilflowing into pump directly, sowhen you select this series suction filter, a vacuum indicator should be necessary for the element clogged by contaminants, you can clean or change it immediately.
-
High Precision Wire Mesh WF Suction Filter Series
Filtration accuracy (p m)： 80、100、180
O.D Series
Thread series
Omit if use hydraulic oil
BH:Wate-glycol
0 mit if without magnet C:With magnet
Wire mesh filter -
Nju Tank Mounted Suction Filter Series
The NJU-series filters are widely used in hydraulic systems. The filter can be installed on the top or at the side of the tank. The filter head should be out of tank a- nd the filter bowl should be inserted from side or top of the tank into oil. The outlet is connected with pump outlet.25~160 Mmin type has combine removable flange, the working height can be adjusted in order to make the tank totally obdurate and that way can prevent the contamination from getting into the tank. During maintenance, open the filter cover, take out the filter element together with sludge cup and clean them. A by-pass valve and a vacuum are incorporated with the filter. When the pressure drop across the filter element reaches O.OIBmpa, the indicator gives signals showing maintenance shall be done. If no service is done and as the pressure drop rises to 0.02Mpa, the by-pass valve will open to ensure oil flow into pump.
-
Isv Suction Line Filter Series
The ISV series line suction filter is composed of hose, element, by-pass valve and visualindicatorand electrical indicator. It is light in weight and strong. It can be instal led vertically in the pipe line out of the tank and won’t affect the arrangement of the pi pe line. The tank size is not limited by filter. This series filter has features as follows:
-
Tfb Suction Type High Precision Filter Series
This kind of filter can be used in the hydraulic system of high accuracy suction filt ration. Please filter metal or rubber granule or other impurity before use in order to prolong the service life.
-
TFA Suction Filter For Hydraulic Oil Filtration
Note: The outlet flange, seal, screw used for this series will be supplied by our plant; the customer only need welding steel tubeQ. Connection of the indicator is M18 x 1.5; wit hout an indicator, a plug with thread will be supplied.
