Products
-
Cub Series Magnetic Millimeter Filter For Precision Lathe
There are two models in this series. CWU-10X100B magnetic filter is used in the lubricating system of precision lathe. Filter element is made of stainless steel wire Mesh which can keep the system clean.
CWU-A25X60 filter is used in the head box of precision lathe. There is a permanent magnet in the core of element the filter, madia is made of stainless steel wire mesh.
-
With Check Valve Magnetic Suction Filter Series
The series filter have manual check valve. During maintenance, the check valve should beclosed in order to stop oil flowing out of the tank. The filter should be und er oil level when installing. If check valve hasn’t open completely, please don’t start the pump working, lest that will cause accident.
A vacuum indicator in the filter will signal when the pressure drop across the el ement reaches 0.018MPa showing that the filter should be cleaned.
-
Sdrlf Duplex Large Flow Rate Return Line Filter Series
SDRLF series filter is composed of two single Bowl filters and a 2-posi-tion 6-way directional valve. It is simple in construction and easy to use. There is a by-pass valve and a contamination indicator in it, forprotecting the hydrau lic system safety.
The feature of thisfilterallows continues operation even during element is changed forwhich is clogged by contaminants. After opening the balance valve and then turn the directional valve, theotherfilterbegins to work; the clogged element should be changed in time.
This series filter is widely used in the hydraulic systems of heavy-duty mi- ningand metallurgical machines.
-
Indicator For Filter Monitoring Differential Pressure
The CS type differential pressure transmitter is mainly used in the pipe passing thermostat. When the hydraulic system is working, the core of the superheater is gradually blocked because of the pollutants in the system, and the pressure of the inlet and outlet of the oil port produces pressure difference (that is, the pressure loss of the leakage core). When the pressure difference increases to the set value of the transmitter, the transmitter will automatically send out a signal to instruct the system operator to clean or replace the temperature core to ensure the safe operation of the system.
-
Sgf Duplex High Pressure Line Filter Series
The SGF series filter is composed of two single bowl filters, check valve, directional valve and indicator. It should be installed at outlet of the high-pressure line. The feature of this filter allows continuous operation even during replacing element, which is clogged by contaminant. When the pressure of the contaminant clogged element reaches to 0.5Mpa, the indicator gives signals showing that the element should be changed. At this time, turn the directional valve, let the other filter work, and change the clogged element. If the element can’t be changed in time until the pressure reaches to 0.6Mpa, the by-pass valve will open automatically to keep the system safety.
-
Sllf Duplex Lubrication Filter Series
SLLF series filter is composed of two single bowl filters and one 2-position 6 way directional valve. It is simple in construction and easy to use. There is a by pass valve and two contamination indicators in it, for protecting the lubricating s- ystem safety.
The feature of this filter allows continuous operation even if the clogged elem ent needs replacing for a clean one. After opening the balance valve and then tu rning the directional valve, the other filter will begin to work in the lubricating system; the clogged element should be changed at that time. This series filter is u- sed in lubricating systems of heavy duty, mining and metallurgical machines. -
Smf Duplex Middle Pressure Line Filter Series
The SMF series filter is composed of two single bowl filters, two checkvalves, directional valve and indicator. It fit the medium and low pressure hydraulic system. The feature of thisfilterallows continuous operation when changing clogged element. When the element is clogged by contaminant, the indicatorwill give signals showing that the elementshould be changed. At this time turn the directionalvalve, theotherfilterwill begin to work and then change the clogged element. Attention: 1.change the clogged element in time lest the clogged element dirt the hydraulic system.
-
Srfb Duplex Tank Mounted Return Filter Series
The thermostat is composed of two single-cylinder leakage devices, directional valve, bypass valve, transmitter, diffuser, etc. It is installed on the top of the tank, the side or bottom, can change in the system without downtime WenXin, new working hydraulic system oil return fine temperature, used to drop in addition to the components in the hydraulic system wear of the metal powder and rubber seal glue impurities, etc., keep the flow back to the oil tank cleaning, used for oil loop in the system.
-
Szu-a Squ-a Swu-a Sxu-a Duplex Return Line Filter Series
The SZU-ASQU-ASXU・A、SWU-A Duplex return line filter series are composed of two single bowl filters and one 2-position 6-way directional valve. It is simple in structure and easy to use, There is by-pass valve and contamination indicator in it, for protecting the hydraulic system safety.
The feature of this filter allows continues operation during replacing the element which is clogged by contaminant. By opening the balance valve and turning the direction valve, the other filter will be working, the clogged element should be changed at that time.
This series filter is widely used in the hydraulic systems of heavy-duty mining and metallurgical machines. -
Srlf Duplex Return Line Filter Series
The SRLF series filter is composed of two single bowlfilters and a 2-posi- tion 6-way directional valve. It is simple in structure and easy to use. There is by-pass valve and a contamination indicator in itforprotecting the hydraulic system safety.
The feature of this filterallows continues operation even during replacin gelement clogged by contaminants. Turning the directional valve, another filter will be working in the hydraulic system, the clogged element should be changed in time.
This series filter is widely used in the hydraulic systems of heavy duty, m- iningand metallurgical machines. -
STF Series Oil Suction Filter Outside Oil Tank
The Model STF filter consists of twoTffilters and a change valve and can be imstalled ontheside, at the bottom ortop of the oil tank, used for removing imp urities from the oil by filtration. The filltering core canbe rep laced without the filter shutdown.The filter, equipped with a signal sender, by-pass valve and self-sealingvalve, is suitableforuse in the hydraulic system requiring f- orcontinuous operation.
-
PLC Plunger Grease Pump With Independent Controller
The working cycle of the lubricating oil pump can be controlled by the host PLC
or an independent controller.
Equipped with a solenoid valve pressure relief device, when the lubricating oil
pump stops running to ensure that the system automatically and quickly relieve
pressure.
Equipped with a pressure regulating valve device, which can independently set
the working pressure of the lubricating oil pump to ensure its safety.
Equipped with exhaust valve, it can eliminate the air in the lubricating oil pump
cavity to ensure the smooth discharge of the lubricating oil pump.
