Products
-
OR-MULTI-TUBE Series Oil Pressure Cooler
1. Heat transfer to determine the best cooling effect. This cooler adopts multi-tube type, large cooling area, Good cooling effect.
2. The cooling area is full. The cooling area is calculated according to the surface area of the copper tube, so the cooling area is full.
3. Cooler material is most suitable for heat dissipation. Adopt pure red copper tube, heat conductivity is above 0.95.
-
Gl Tube Type Oil Cooler Series
This product is manufactured by our company that combining with the int ernal and external base of advanced technology and craft. The material of h- eat-exchange pipe, adopted low-rib finned red copper pipe, used the structure of transverse current breaker board, turbulence board and the advanced manufacture craft of mechanism expanding, has the features of novel structure, small dimension, light weightand well heat-exchanging effect a- nd soon. This product is a new type and higli efficiency cooler, mainly used in low-viscosity hydraulic and oil system to cool the work oil to the specified temperature. So it is an Ideal cooling facility that can be widely used in cooling the hydraulic equipment in the trade such as chemical industry, electric power, metallurgical industry, mine and light industry and soon.
-
Srfa Duplex Tank Mounted Mini-Type Return Filter Series
The SRFA series filter is composed of two single bowlfilters, a 2-position 3 -way directioal valve, by-pass valve, indicator and diffuser. It is simple in structure and easy to use. It is mounted on tank top; there is by-pass valve and contamination indicator in it, for protecting the hydraulic system safety. The feature of this filter allows continuous operation even during replacing element, which is clogged by contaminant. When the filter element is clogged by contaminant that results in the pressure reaching to 0.35MPa the indicator will give signals. At this time, turn the directional valve inorder to make t- he otherfilterwork then change the element.
-
Tf Series External Self Sealing Oil Absorption Filter
A vacuum indicator in the filter gives signals when the pressure drop across the element reaches 0.018MPa showing that the filter shall be cleaned. If no maintena nce is done, as the pressure drop rises to 0.02MPa, the by-pass valve will open to a- llow oilflowing into pump. This kind of filter can be installed at inlet port of the pump, in order to protect the pump and other component. This filter can help to keep hydr aulic system clean and easy to use.
