Well-designed Ylx Series Oil-Sucking Filter On Oil Tank - Srfb Duplex Tank Mounted Return Filter Series – Xinyuan

The thermostat is composed of two single-cylinder leakage devices, directional valve, bypass valve, transmitter, diffuser, etc. It is installed on the top of the tank, the side or bottom, can change in the system without downtime WenXin, new working hydraulic system oil return fine temperature, used to drop in addition to the components in the hydraulic system wear of the metal powder and rubber seal glue impurities, etc., keep the flow back to the oil tank cleaning, used for oil loop in the system.
When the temperature core of a drip dispenser is blocked and the pressure difference between inlet and outlet is 0.35MPa, the transmitter sends the signal. At this elbow, turn the reversing valve to make the spare drip dispenser work, and then replace the blocked temperature core.
When the blocked temperature core cannot be replaced in time for some reason, and the pressure difference of the inlet and outlet further rises to 0.4Mpa, the bypass valve automatically starts to work, so as to protect the drip core and the system to work normally, but the user should replace the temperature core as soon as possible.
With a check valve, when the drip dispenser is placed on the side and bottom of the tank, the oil in the tank will not flow out when the temperature core is replaced. The diffuser is arranged at the bottom of the return oil cylinder, which can make the medium of the return oil flow smoothly into the oil tank, and is not easy to produce bubbles, so as to reduce the re-entry of air and weaken the commotion of the deposited pollutants.
The leakage core is made of new chemical fiber overdrop material, which has the advantages of high overtemperature precision, large oil transfer capacity, small original pressure loss, large pollutant carrying capacity, etc. The overtemperature precision is marked by absolute overtemperature precision, the overdrop ratio is 0, 5, 10, 20N200, and the overtemperature efficiency is NN99.5%, which meets the ISO standard.

Duplex tank mounted return filter

BH:Water-glycol

Omit if use hydraulic oil

Flow rate:(L/min)

Y: With CYB-I indicator^ DC24V

C:With CY-II indicator^ 220V

Omit if without indicator

 Size Y as requested

Note:* is represents filtration. If the filter fluid is water-glycol, usage pressure 1.6 MPa, flower rate 631/min, filtration accuracy 10 p m and the filter eq nipped with CYB-I indicator. The model of the filter is SRFB • BH-63 x 10L-Y, the model of element is SFBX • BH-63 x 10