Wholesale Price Therma Level Gauge - OR-MULTI-TUBE Series Oil Pressure Cooler – Xinyuan
Wholesale Price Therma Level Gauge - OR-MULTI-TUBE Series Oil Pressure Cooler – Xinyuan Detail:
1. Heat transfer to determine the best cooling effect. This cooler adopts multi-tube type, large cooling area, Good cooling effect.
2. The cooling area is full. The cooling area is calculated according to the surface area of the copper tube, so the cooling area is full.
3. Cooler material is most suitable for heat dissipation. Adopt pure red copper tube, heat conductivity is above 0.95.
1. the cooling pipe oil two can freely decide the inlet and outlet, the flow of oil itself is not restricted. The inlet of water must be entered from the bottom and discharged from the upper outlet.
2. Fresh water only. The use of sea water shall be specially customized.
3. Food and chemicals must not be used.
4. water inlet and oil inlet temperature difference in more than 80°C can not be used.
5. the highest pressure: oil side 10kg/cm2, water side 7kg/cm2
6. the water side (heat transfer tube inner surface) for about 4 months or half a year, remove scale once, can maintain a good cooling efficiency. When using high viscosity oil, please keep the amount of oil equal to the amount of water.
Model | A | B | C | ΦD | E | F | G | J | K | 4>L | M | N | Traffic |
OR-60 | 450 | 305 | 46 | 90 | 120 | 3/4″ | 3/4″ | 23 | 11 | 115.5 | 95 | 7×10 | 60 |
OR-100 | 555 | 403 | 57 | 114 | 150 | 3/4″ | 3/4″ | 33 | 12.5 | 145.5 | 106.5 | 10×20 | 100 |
OR-150 | 575 | 385 | 76 | 140 | 180 | 11/4″ | 1″ | 30 | 12.5 | 175 | 130 | 13×16 | 150 |
OR-250 | 780 | 585 | 76 | 140 | 180 | 11/4″ | 1″ | 30 | 12.5 | 175 | 130 | 13×16 | 250 |
OR-350 | 1180 | 990 | 76 | 140 | 180 | 11/4″ | 1″ | 30 | 12.5 | 175 | 130 | 13×16 | 350 |
OR-600 | 1175 | 950 | 87 | 165 | 205 | T | 11/411 | 34 | 12.5 | 200 | 161 | 13×16 | 600 |
OR-800 | 1700 | 1490 | 87 | 165 | 205 | T | 11/4“ | 34 | 12.5 | 200 | 161 | 13×16 | 800 |
OR-1000 | 2140 | 1890 | 87 | 165 | 205 | T | 11/4″ | 34 | 12.5 | 200 | 161 | 13×16 | 1000 |
Model |
L |
Cl |
C |
L2 |
LI |
H2 |
B |
C2 |
n-b x I |
Hl |
D2 |
DI |
(12 |
dl |
Weight (Kg) |
SL-303 | 305 | 45 | 152 | 107 |
80 |
85 |
115 |
75 |
4-11×20 | 64 |
120 |
87.9 |
G3/4 |
G3/4 |
4.5 |
SL-304 | 377 | 224 | 179 |
5 |
|||||||||||
SL-305 | 450 | 296 | 251 | 5.5 | |||||||||||
SL-307 | 593 | 440 | 395 |
6 |
|||||||||||
SL-309 | 737 |
584 |
539 |
7 |
|||||||||||
SL-311 | 880 | 728 | 683 |
8 |
|||||||||||
SL-408 | 467 | 75 | 284 | 240 |
94 |
100 |
150 |
110 |
4-10×20 | 85 |
160 |
121 |
G1 1/4 |
G3/4 |
14 |
SL-411 | 610 | 428 | 384 |
17 |
|||||||||||
SL-415 | 755 | 572 | 528 |
19 |
|||||||||||
SL-418 | 900 | 716 | 672 |
22 |
|||||||||||
SL-421 | 1042 | 860 | 816 |
25 |
|||||||||||
SL-512 | 528 | 70 | 298 | 206 |
121 |
140 |
180 |
135 |
4-18×25 | 95 |
180 |
139.8 |
G1 1/2 |
G1 |
20 |
SL-518 | 635 | 406 | 342 |
22 |
|||||||||||
SL-526 | 852 | 622 | 558 |
27 |
|||||||||||
SL-534 | 1070 | 838 | 774 |
32 |
|||||||||||
SL-542 | 1285 |
1054 |
990 |
38 |
Note: our company can manufacture all kinds of large and special coolers according to the requirements of customers.
1. Calculate the heat required to exchange:
Q(Kcal /h) (1) Calculate according to the temperature requirements and flow of the oil: Q is CW of N dot T2.In the formula, the specific heat of C oil (kCa L/kg°C) W — the flow rate of oil (kg/h)T1 — inlet oil temperature (°C) T2 — outlet oil temperature (°C)Among them: W = qPIn the formula, Q — flow rate of oil (IV min) P — density of oil (kg/L)According to the calorific value of the hydraulic system: Q = Pr-Pc-PhcWhere, PR is the input power of the hydraulic system PHC one tank, pipe heat dissipation power PC – output effective power.
2. Select the cooler model
Check the product performance curve according to the calculated heat exchange Q and oil flow Ws, and the intersection point of the two is the selected model.
3. Supplementary Notes
The actual operating conditions of the cooler may differ from their performance test conditions. The oil viscosity is small, the water flow is large, the temperature difference between the oil temperature and the water temperature is large, the model can be selected to be smaller than the selected model, on the contrary, the model is selected to be large.
Product detail pictures:
Related Product Guide:
Like a result of ours specialty and repair consciousness, our enterprise has won a superb popularity amid buyers everywhere in the environment for Wholesale Price Therma Level Gauge - OR-MULTI-TUBE Series Oil Pressure Cooler – Xinyuan , The product will supply to all over the world, such as: Angola, Paris, Holland, Our expert engineering team will generally be prepared to serve you for consultation and feedback. We're able to also give you with free of charge samples to meet your requirements. Best efforts will likely be produced to provide you the best service and merchandise. When you are keen on our business and items, make sure you speak to us by sending us emails or call us quickly. In an effort to know our merchandise and company extra, you may come to our factory to view it. We'll generally welcome guests from all over the world to our business to create business relations with us. Be sure to feel cost-free to speak to us for small business and we believe we are going to share the best trading experience with all our merchants.
By Christian from Croatia - 2017.05.02 11:33
The manufacturer gave us a big discount under the premise of ensuring the quality of products, thank you very much, we will select this company again.
By Mary from Wellington - 2018.06.30 17:29